FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Figure 8-8 Removing a filler panel
4.
5.
Step 3 Install the server node.
To prevent device damage or personal injury, hold the bottom of the device with
both hands when installing it.
1.
2.
Issue 07 (2019-12-20)
Close the ejector lever.
Place the filler module in an accessory recycle bin.
NO TICE
Press the ejector release button on the server node. See (1) in
Fully open the ejector lever. See (2) in
Copyright © Huawei Technologies Co., Ltd.
8 Parts Replacement
Figure
8-9.
Figure
8-9.
48