Huawei FusionServer Pro XH321 V5 V100R005 Maintenance And Service Manual page 141

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Operation
Power control
Log collection
Firmware update
PCIe card or drive
firmware update
Upgrade evaluation
E9000 upgrade
Device change
V5 configuration
check
V2/V3 configuration
check
Burn-in test
Device repair
V3 server OS
deployment
Hardware diagnosis
iBMC log analysis
E9000 switch module
log analysis
Issue 07 (2019-12-20)
Description
Perform power control of servers in batches, including
resetting the iBMCs, and powering on or off or
restarting servers in batches.
Collect the hardware and OS logs of servers in batches
by simply clicking the mouse.
Update the BMC, BIOS, CPLD, and Smart Provisioning
firmware of servers in batches.
Update the PCIe card firmware or drive firmware by
mounting the virtual media.
Perform an evaluation of E9000 switch modules in
batches before an upgrade.
Upgrade the E9000 switch modules and E9000 chassis
in batches.
Allow specific functions to be automatically
implemented by using customized programs.
Check the iBMC, BIOS, and RAID configurations of V5
servers in batches.
Export BIOS configurations of V2 and V3 servers in
batches.
Test the CPUs, memory modules, drives, and link bit
errors of servers in batches.
Restore the servers whose iBMC failed to start due to
an exception in data collection.
Install the operating system on V3 servers in batches
using SerivceCD 2.0.
Perform hardware diagnosis using FusionServer Tools
Toolkit.
Parse iBMC logs to analyze and locate faults.
Perform analysis of switch module logs. The
configuration information and status of switch modules
are displayed in graphics, helping locate network
problems.
Copyright © Huawei Technologies Co., Ltd.
12 Software and Configuration Utilities
133