Huawei FusionServer Pro XH321 V5 V100R005 Maintenance And Service Manual page 33

Server node
Hide thumbs Also See for FusionServer Pro XH321 V5 V100R005:
Table of Contents

Advertisement

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Category
Storage
Issue 07 (2019-12-20)
Specifications
Supports a variety of drive configurations. For details,
see
2.4.1 Drive
● Supports two M.2 SSDs.
NOTE
● The M.2 SSD module is used only as the boot device
● The M.2 SSD cannot be used to store data due to poor
● The M.2 SSD is not recommended for write-intensive
● Do not use the M.2 SSD as the cache.
● Supports hot swap of SAS/SATA drives.
● Supports a variety of RAID controller cards. Use the
Intelligent Computing Compatibility Checker
obtain information about the specific RAID
controller cards supported.
– The RAID controller card supports RAID
configuration, RAID level migration, and drive
roaming.
– The RAID controller card does not occupy a
standard PCIe slot.
For details about the RAID controller card, see
Huawei V5 Server RAID Controller Card User
Guide.
Copyright © Huawei Technologies Co., Ltd.
Configurations.
when the OS is installed. Small-capacity (32 GB or 64
GB) M.2 SSDs do not support logging due to poor
endurance. If a small-capacity M.2 SSD is used as the
boot device, a dedicated log drive or log server is
required for logging. For example, you can dump
VMware logs in either of the following ways:
● Redirect /scratch. For details, see
kb.vmware.com/s/article/1033696.
● Configure syslog. For details, see
kb.vmware.com/s/article/2003322.
endurance. In write-intensive applications, the M.2 SSD
will wear out in a short time.
Use enterprise-level high endurance (HE) SSDs or
HDDs for data storage.
service software due to poor endurance.
3 Product Specifications
https://
https://
to
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fusionserver pro xh321 v5V100r005

Table of Contents