Huawei FusionServer Pro XH321 V5 V100R005 Maintenance And Service Manual page 77

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Figure 8-33 Removing the heat sink and processor carrier
Step 7 Remove the processor.
1.
2.
Issue 07 (2019-12-20)
● When removing a processor, hold the processor and its carrier to prevent the processor
from falling off.
● To prevent damage to the pins, do not touch the pins of the processor socket or the
corresponding area on the processor.
● Keep the processor away from the chassis to prevent thermal compound from falling
off.
Bend the edge of the carrier with the triangular hole to release the processor
from the carrier.
Figure 8-34 Removing a processor (1)
Hold the two sides of the processor and lift it.
Copyright © Huawei Technologies Co., Ltd.
8 Parts Replacement
69