Huawei FusionServer Pro XH321 V5 V100R005 Maintenance And Service Manual page 116

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
●
----End
Issue 07 (2019-12-20)
After the login is successful, the Information page is displayed. The user
name is displayed in the upper right corner.
The system may display a message indicating incorrect username or password
n
when you attempt to log in using Internet Explorer after the system is
upgraded. If this occurs, press Ctrl+Shift+DEL and click Delete to clear the
browser cache. Then, attempt to log in again.
If the login still fails, choose Tools > Internet Options > Advanced in the
n
menu bar and click Reset to restore default settings of Internet Explorer. Then
attempt to log in again.
Log in as a Lightweight Directory Access Protocol (LDAP) user.
NO TICE
Before login, ensure that the following settings meet the requirements:
– A domain controller exists on the network, and a user domain and
Lightweight Directory Access Protocol (LDAP) users have been created on
the domain controller.
– On the iBMC WebUI, the LDAP function has been enabled, and a user
domain and LDAP users have been created. For details, see the LDAP
page.
For details about how to create a domain controller, a user domain, and LDAP
users, see domain controller documents. The iBMC provides only the access
function for LDAP users.
a. Select the language to be used.
b. Enter the LDAP user name and password.
If an LDAP user name is entered in User Name, Domain can be Automatic
n
matching or a specified domain.
LDAP user name@Domain name is entered, Domain must be Automatic
If
n
matching.
In versions earlier than iBMC V294, the maximum password length for an
n
LDAP user is 20 characters. In iBMC V294 and later versions, the maximum
password length for an LDAP user is 255 characters.
c. Select the LDAP user domain from the Domain drop-down list.
Configured domain server: Select a domain server to log in as an LDAP user.
n
The iBMC locates the user from the domain server.
Automatic matching: If this option is selected, the iBMC searches for the
n
user from the local user list first. If no match is found, the iBMC searches
from the domain servers in the sequence displayed in the Domain drop-down
list.
d. Click Log In.
After the login is successful, the Information page is displayed. The user
name is displayed in the upper right corner.
Copyright © Huawei Technologies Co., Ltd.
10 Common Operations
108