Installing The Avago Sas3004Imr Pcie Raid Control Card; Removing An M.2 Fru On The Avago Sas3004Imr Pcie Raid Controller Card - Huawei FusionServer Pro XH321 V5 V100R005 Maintenance And Service Manual

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
8.4.8 Installing the Avago SAS3004iMR PCIe RAID Control
Card
Procedure
Step 1 Power off the server node.
For details, see
Step 2 Remove the server node.
For details, see
Step 3 Place the server node on the ESD workstation.
Step 4 Take the spare part out of its ESD bag.
Step 5 Determine the position of the Avago SAS3004iMR RAID controller card.
Step 6 Install the Avago SAS3004iMR RAID controller card.
For details, see
Step 7 Install the M.2 FRU on the Avago SAS3004iMR RAID controller card.
For details, see
RAID Controller
Step 8 Install the server node.
For details, see
Step 9 Power on the server node.
For details, see
----End
8.4.9 Removing an M.2 FRU on the Avago SAS3004iMR PCIe
RAID Controller Card
The M.2 FRU on the Avago SAS3004iMR RAID controller card is hot swappable.
Procedure
Step 1 Determine the positions and slots of the M.2 FRUs on the Avago SAS3004iMR
RAID controller card.
Determine the position of the M.2 FRU to be removed. Do not remove the M.2
FRU running an OS. Otherwise, all services on the server node will be affected.
Issue 07 (2019-12-20)
8.3.2 Power-Off
8.3.3 Removing an XH321
8.4.20 Installing a PCIe
8.4.10 Installing an M.2 FRU on the Avago SAS3004iMR PCIe
Card.
8.3.4 Installing an XH321
8.3.1 Power-On
NO TICE
Copyright © Huawei Technologies Co., Ltd.
Procedure.
V5.
Card.
V5.
Procedure.
8 Parts Replacement
64