Operating States/Error Signals; Signals For Operating States - Otto Bock Genium 3B1-2 Instructions For Use Manual

Non-ionising radiation
Protection against penetration of solid foreign objects with a diameter greater than
1 mm, no protection against water
Protected against dust, protected against splashing water
In some jurisdictions it is not permissible to dispose of these products with unsor­
ted household waste. Disposal that is not in accordance with the regulations of
your country may have a detrimental impact on health and the environment. Please
observe the instructions of your national authority pertaining to return and collec­
tion.
Declaration of conformity according to the applicable European directives
Serial number
Lot number
Caution, hot surface
Protect from moisture

17.2 Operating states/error signals

The prosthesis indicates operating states and error messages through beeps and vibration sig­
nals.

17.2.1 Signals for operating states

Battery charger connected/disconnected
Beep signal
1x short
Mode switching
INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
92
Vibration signal
3x long
1x before beep signal Self-test completed successfully, product is
Event
Charging mode started (3 sec. after connecting
the battery charger)
operational