Turning Deep Sleep Mode On/Off Using The Cockpit App; Turning Deep Sleep Mode On/Off Using The Remote Control; Opg Function (Optimised Physiological Gait) - Otto Bock Genium 3B1-2 Instructions For Use Manual

The cockpit app or remote control (optional accessory) can be used to place the knee joint in a
deep sleep mode, in which power consumption is minimised. The knee joint offers no functionality
in this mode. The safety mode damping values are activated.
It can be awakened from deep sleep mode with the cockpit app, remote control or by connecting
the charger. Waking from deep sleep mode using the cockpit app or remote control can take up
to 30 seconds.
After ending deep sleep mode, the knee joint is in basic mode again.

9.6.1 Turning deep sleep mode on/off using the Cockpit app

Activating deep sleep mode
1) When the component is connected, tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Functions".
3) Tap the entry "Activate Deep Sleep".
4) Follow the on-screen instructions.
→ The activation of deep sleep mode is indicated by a short beep signal and a short vibration
signal, assuming that mute mode (silent mode) is not active.
Deactivating deep sleep mode
1) When deep sleep mode is active for the currently connected prosthesis, the Exit deep sleep
mode button automatically appears when the Cockpit app is started.
2) Tapping this button establishes a connection to the prosthesis and deactivates deep sleep
mode.
INFORMATION: Establishing a connection in deep sleep mode can take up to 30
seconds.
If a prosthesis is in deep sleep mode but not connected to the Cockpit app, a connection to the
prosthesis has to be established (see Page 70).

9.6.2 Turning deep sleep mode on/off using the remote control

Activating deep sleep mode
keys to select the menu option "Device settings" in the main menu and confirm
1) Use the ,
this with the key.
keys to select the menu option Deep sleep and confirm this with the key.
2) Use the ,
→ The activation of deep sleep mode is indicated by a short beep signal and a short vibration
signal. Also the remote control is turned off.
Deactivating deep sleep mode
1) Use the key to activate the remote control.
2) With the key, establish a connection to the prosthesis. Establishing the connection to the
prosthesis deactivates deep sleep mode.
INFORMATION: Establishing a connection in deep sleep mode can take up to 30
seconds.

9.7 OPG function (Optimised Physiological Gait)

INFORMATION
To use this function, it must be enabled by the prosthetist.
The OPG function minimises the prosthesis wearer's prosthetic deviations from a harmonious gait
pattern and promotes more biomechanically correct walking. Selection of this function enables
the following features:
82