1 Important information
INFORMATION
Remote control function only possible with version 1.0.0.6 or above
Please note that you can only use this knee joint and the updated one with the 4X350 remote
control in version 1.0.0.6 and higher.
Therefore, check the version of the remote control as follows:
►
With the remote control switched on, use the
settings and confirm with the
Use the
and
►
►
Use the
and
appears than 1.0.0.6, the remote control must be updated by an authorised Ottobock Ser
vice Centre.
The function of the remote control with this or the updated knee joint is only pos
sible with version 1.0.0.6 or higher.
54
key.
keys to select the menu option Info and confirm this with the key.
keys to select the RC version: 1.0.0.4 menu option. If an older version
keys to select the menu option RC
and