Operating States/Error Signals; Signals For Operating States - Otto Bock Kenevo 3C60 Instructions For Use Manual

Serial number (YYYY WW NNN)
YYYY – year of manufacture
WW – week of manufacture
NNN – sequential number
Lot number (PPPP YYYY WW)
PPPP – plant
YYYY – year of manufacture
WW – week of manufacture
Medical device
Article number
Protect from moisture
Protection against penetration of solid foreign objects with a diameter greater than
1 mm, no protection against water
Protection against penetration of solid foreign objects with a diameter greater
than 12.5 mm, protection against water dripping diagonally up to 15°.
Caution, hot surface

14.2 Operating states/error signals

The prosthesis indicates operating states and error messages through beeps and vibration sig­
nals.

14.2.1 Signals for operating states

Battery charger connected/disconnected
Beep signal
1 x short
–
1 x short
Mode switching
Beep signal Vibration
signal
1x short 1x short
Vibration signal
–
3 x short
1 x before beep signal
Additional action per­
formed
Mode switching using the
Cockpit app
Event
Battery charger connected or
Battery charger already disconnected prior to
start of charging mode
Charging mode started (3 sec. after connecting
the battery charger)
Battery charger disconnected after start of char­
ging mode
Event
Mode switching is performed
using the Cockpit app.
87