Operating States/Error Signals; Signals For Operating States - Otto Bock Genium X3 3B5-3 Instructions For Use Manual

Dustproof, protection against permanent submersion.
Maximum depth: 3 m
Maximum time: 1 hour
The product's Bluetooth wireless module can establish a connection to devices with the follow­
ing operating systems: iOS (iPhone, iPad, iPod,...) and Android
In some jurisdictions it is not permissible to dispose of these products with unsorted household
waste. Disposal that is not in accordance with the regulations of your country may have a detri­
mental impact on health and the environment. Please observe the instructions of your national
authority pertaining to return and collection.
Declaration of conformity according to the applicable European directives
Serial number
Lot number
Caution, hot surface
Protect from moisture
Please note the instructions for use
Check
Ottobock Data Station.

17.2 Operating states/error signals

The prosthesis indicates operating states and error messages through beeps and vibration signals.

17.2.1 Signals for operating states

Battery charger connected/disconnected
Beep signal
1x short
Mode switching
INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
INFORMATION
If the Volume parameter is set to '0' in the Cockpit app, there are no beep signals (see Page 37).
Beep signal Vibration sig­
nal
1x short 1x short
Genium X3 3B5-3/3B5-3=ST
the product settings
Vibration signal
3x long
1x before beep signal
Additional action performed
Mode switching using the Cockpit
app
using the corresponding
Event
Charging mode started (3 sec. after connecting the bat­
tery charger)
Self-test completed successfully, product is operational
Event
Mode switching is performed using the
Cockpit app.
Appendices
adjustment software of the
51