Mute Mode (Silent Mode); Turning Mute Mode On/Off Using The Cockpit App; Turning Mute Mode On/Off Using The Remote Control; Deep Sleep Mode - Otto Bock Genium 3B1 Instructions For Use Manual

10.6 Mute mode (silent mode)

Activating mute mode (silent mode) turns off the audible feedback signals and the vibration signals. However,
warnings in case of component errors are still generated (see Page 91).
Mute mode can be activated/deactivated by using the Cockpit app or the remote control (optional accessory).
INFORMATION
Connecting the battery charger automatically deactivates mute mode again.

10.6.1 Turning mute mode on/off using the Cockpit app

1) When the component is connected, tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Functions".
3) Tap the entry "Mute mode".
4) Follow the on-screen instructions.

10.6.2 Turning mute mode on/off using the remote control

1) When a connection is established, use the
confirm this with the key.
keys to select the Mute menu option. The current status is displayed.
2) Use the ,
3) By pressing the key, mute mode is either turned on (On) or turned off (Off).
4) To leave the menu without saving changes, use the
key.

10.7 Deep sleep mode

INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
The cockpit app or remote control (optional accessory) can be used to place the knee joint in a deep sleep mode,
in which power consumption is minimised. The knee joint offers no functionality in this mode. The safety mode
damping values are activated.
It can be awakened from deep sleep mode with the cockpit app, remote control or by connecting the charger.
Waking from deep sleep mode using the cockpit app or remote control can take up to 30 seconds.
After ending deep sleep mode, the knee joint is in basic mode again.

10.7.1 Turning deep sleep mode on/off using the Cockpit app

Activating deep sleep mode
1) When the component is connected, tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Functions".
3) Tap the entry "Activate Deep Sleep".
4) Follow the on-screen instructions.
→ The activation of deep sleep mode is indicated by a short beep signal and a short vibration signal, assuming
that mute mode (silent mode) is not active.
Deactivating deep sleep mode
1) When deep sleep mode is active for the currently connected prosthesis, the Exit deep sleep mode button
automatically appears when the Cockpit app is started.
2) Tapping this button establishes a connection to the prosthesis and deactivates deep sleep mode.
INFORMATION: Establishing a connection in deep sleep mode can take up to 30 seconds.
If a prosthesis is in deep sleep mode but not connected to the Cockpit app, a connection to the prosthesis has to
be established (see Page 74).

10.7.2 Turning deep sleep mode on/off using the remote control

Activating deep sleep mode
keys to select the menu option "Device settings" in the main menu and confirm this with the
1) Use the ,
key.
keys to select the menu option Deep sleep and confirm this with the key.
2) Use the ,
Genium 3B1/3B1=ST
, keys to select the "Status" menu option in the main menu and
key to select the symbol and confirm this with the
Ottobock | 85
Use