Important information
1 Important information
INFORMATION
Remote control function only possible with version 1.0.0.6 or above
Please note that you can only use this and/or the updated knee joint with the 4X350-X3 remote control in ver
sion 1.0.0.6 or higher.
Therefore, check the version of the remote control as follows:
► With the remote control switched on, use the
firm with the
key.
keys to select the menu option Info and confirm this with the key.
► Use the
and
keys to select the RC version: 1.0.0.4 menu option. If an older version appears than 1.0.0.6,
► Use the
and
the remote control must be updated by an authorised Ottobock Service Centre.
The function of the remote control with this or the updated knee joint is only possible with version
1.0.0.6 or higher.
8
keys to select the menu option RC settings and con
and
Genium X3 3B5-2/3B5-2=ST