Festo CMSX-C-U-F1 Series Manual page 7

CMSX-...-C-U-F1-...
the opposite side are the earth terminal (è Fig. 1, aB and Fig. 2, aA ) and the pneumatic ports
(è Fig. 3, aA and Fig. 2, 9 ) with supply port, working ports and exhaust port.
Under the housing cover is the printed circuit board with the device electronics. Located on the printed-
circuit board are:
– The two-line LCD display
– 3 keys for configuration and commissioning
– Terminal strips for electrical connection.
7
1
LCD display
2
Terminal strip (pin 1 ... 14)
3
Terminal strip (pin 15, 16)
4
Set key
Fig. 4 Operating elements and connections in the device (example of a linear version)
With the Add, Sub and Set keys, configuration and commissioning can be carried out in a menu-driven
manner. During commissioning, the setpoint values can be specified through keys as needed.
The two-line LCD display shows all texts in English as short texts. A maximum of 8 characters per line
can be shown.
Festo – CMSX-...-C-U-F1-... – 1506a English
1
6 5 4
5
6
7
2
3
Sub key
Add key
Earth terminal
7