Information Menu (5); Initialization Menu (6) - Festo CMSX-C-U-F1 Series Manual

CMSX-...-C-U-F1-...
7.6.9

Information menu (5)

The following information can be called up in the Information menu (5):
Display Description
MENU 5 INFORM
Lower limit of the initialized opening angle (semi-rotary drives)
L1 ...°
...
Bottom dead center (linear drives)
L1 IN
...
Upper limit of the initialized opening angle (semi-rotary drives)
L2 ...°
...
Top dead center (linear drives)
L2 OUT
...
Number of switching cycles of the fast-switching valve V1 since the last initialization
V1 ...k
process
...k
Number of switching cycles of the fast-switching valve V2 since the last initialization
V2 ...k
...k
Firmware design of the device
Ver A3.3
3.x
1) k for kilo (thousands)
Tab. 22 Information menu (5)
MENU
5 INFORM
Fig. 33 Movement in the Information menu (5)
Operation
Briefly press Add
Briefly press Sub
Briefly press Set
Press and hold Set
Tab. 23 Operation in the Information menu (5)
7.6.10

Initialization menu (6)

Initialization can be started or a reset executed in the Initialization menu (6). Further, current settings
can be saved as individual presettings.
Festo – CMSX-...-C-U-F1-... – 1506a English
Numerical value [°]
Numerical value [°]
Numerical value
Numerical value
Version number
3
*INFORM*
L1 ...°
6
L2 ...°
V1 ...k
...
Selection in the INFORM menu
1 Continue to the next selection
2 Back to the previous selection
3 Back to the main menu
4
1)
[1000]
1)
[1000]
2
1
45