Electrical Installation - Festo CMSX-C-U-F1 Series Manual

CMSX-...-C-U-F1-...
6.3

Electrical installation

Warning
Electric voltage.
Injury due to electric shock.
• Switch off the power supply before opening the device.
Note
Electrostatically sensitive devices.
Damage to the internal electronics due to electrostatic discharge.
• Observe the handling specifications for electrostatically sensitive devices.
• Ensure assembly personnel are electrostatically discharged.
Note
The IP 65 degree of protection depends on the type of electrical connection. Inappropri­
ate cables or an incorrect installation will reduce the degree of protection of the posi­
tioner.
Note
Long signal lines reduce the resistance to interference.
• Keep signal lines shorter than 30 m.
Note
The signal value is unstable if different voltage sources are used for the signal value and
power supply.
• Apply a bridge to the earth terminals of the signal value and the power supply pin 4
and pin 6.
18 Festo – CMSX-...-C-U-F1-... – 1506a English