Festo CMSX-C-U-F1 Series Manual page 35

CMSX-...-C-U-F1-...
Pressing the Add or Sub key selects a function in the menu (è Fig. 24, 1 ). Pressing the Set button
confirms the selection. The current setting is then displayed. A setting can be selected with Add and
Sub (è Fig. 24, 2 ). Pressing the Set key confirms the current selection and returns to the menu.
Note
Parameter changes become effective immediately after the Set key is pressed. For ex­
ample, digital outputs can change their signal status by changing settings even in the
controller stopped operating status.
MENU
2 CONFIG
1
Select function with Add (1) and Sub (2)
Fig. 24 Movement in the menu configuration (2) – example SIGNAL
Operation
Briefly press Add
Briefly press Sub
Briefly press Set
Press and hold Set
Tab. 17 Operation in the Configuration menu (2)
Festo – CMSX-...-C-U-F1-... – 1506a English
6
3
*CONFIG*
6
signal
open
direct
...
1
Selection in the CONFIG menu
1 Continue to the next selection
2 Back to the previous selection
3 Confirm selection
6 Back to the main menu
SIGNAL
3
2 0-10V
4-20mA
1
0-20mA
2
Select setting with Add (1) and Sub (2)
Setting (e.g. SIGNAL)
Confirm selection and back to
the menu (2)
Confirm selection and back to
the main menu
2
1
2
35