Transport And Storage; Requirements For Product Use - Festo CMSX-C-U-F1 Series Manual

CMSX-...-C-U-F1-...
4

Transport and storage

– Comply with all legal requirements for the handling of hazardous substances and the transport of
dangerous goods.
For return to Festo è Chapter 5.
– Store the product in a cool, dry, UV- and corrosion-protected environment. Ensure storage times are
short.
5

Requirements for product use

• Installation and commissioning is to be carried out only by qualified personnel, in accordance with
the documentation.
• The product may only be used in its original status without unauthorised modifications.
• Only use the product if it is in perfect technical condition.
• Observe the product labelling.
• Comply with all applicable national and international regulations.
• Only use compressed air in accordance with specifications (è Technical data).
• The supplied cable connector is used only for cable throughfeed. To ensure the specified degree of
protection IP65, seal each cable entry tight (cable connector, blanking plug).
Return to Festo
Hazardous substances can endanger the health and safety of personnel and cause damage to the envir­
onment. To prevent hazards, the product should only be returned upon explicit request by Festo.
– Consult your regional Festo contact.
– Complete the declaration of contamination and attach it to the outside of the packaging.
– Comply with all legal requirements for the handling of hazardous substances and the transport of
dangerous goods.
Festo – CMSX-...-C-U-F1-... – 1506a English 13