Installation; Mechanical Installation; Cmsx-S - Festo CMSX-C-U-F1 Series Manual

CMSX-...-C-U-F1-...
6

Installation

Note
Installation should only be conducted by qualified specialized personnel
6.1

Mechanical installation

Note
• Protect the underside of the device against splash water, moisture and humidity by
selecting an appropriate mounting position.
6.1.1 CMSX-S-... (rotary)
Note
• Observe the direction of rotation of the semi-rotary drive.
• Only use appropriate mounting adapters.
(Accessories è www.festo.com/catalogue)
The angle position of the semi-rotary drive is sensed by the integrated potentiometer through the shaft
of the positioner. The shaft of the positioner can be turned in any way, since it does not have a mechan­
ical stop. But the permissible sensing range is 100°. The sensing range and correct alignment of the
shaft of the positioner is depicted on the underside of the housing.
1
Flat spot of the shaft
2
Identification of the alignment of the flat
spot
Fig. 11 Identification of the sensing range (underside of the housing)
14
1 2
2
3
Identification of the sensing range
Festo – CMSX-...-C-U-F1-... – 1506a English
3