Initialisation - Festo CMSX-C-U-F1 Series Manual

Hide thumbs Also See for CMSX-C-U-F1 Series:

Table of Contents

CMSX-...-C-U-F1-...

7. To switch back to the main menu, briefly press the Set key. The CMSX then displays the first menu

again

1 Sensor

8. If the initial position should be displayed again, press the Set key for approx. 3 s. Then the CMSX

displays the initial position again.

−−− 0.0%

VP: 0.0%

7.7.2

Initialisation

In initialization, the CMSX adjusts control of the fast-switching valves to the direction of rotation of the

potentiometer and creates the relationship between the measured variable and position. In addition,

the CMSX determines a maximum positioning time. For this purpose, both end positions of the drive are

travelled to and saved as limits. Always perform an initialization in the following cases:

– After installation at the initial start-up

– After re-adjustment of the flow control valves

– After changes in the system structure, e.g. changes in the tubing connections.

Initialization can be carried out manually or automatically. We recommend performance of automatic

initialization (è Section 7.7.3).

Festo – CMSX-...-C-U-F1-... – 1506a English

Table of Contents

Show Quick Links

Table of Contents