Replacement And Repair - Festo CMSX-C-U-F1 Series Manual

CMSX-...-C-U-F1-...
11

Replacement and repair

• Send defective devices to the Festo repair service. Information about spare parts and accessories
è www.festo.com/catalogue.
Note
Different settings will result in different characteristics.
• Check especially when replacing the positioner to see which settings are necessary
and make sure that these are restored, if necessary.
The device has certain presettings from the factory.
Presettings for configuration è Tab. 16
Presettings for parameterisation è Tab. 18.
Before replacement:
• Check the pneumatic tubing connection of the device.
• Check the complete electric cabling of the device.
• Check device settings and parameterisation before using and replacing the device.
56 Festo – CMSX-...-C-U-F1-... – 1506a English