Menu Level - Festo CMSX-C-U-F1 Series Manual

CMSX-...-C-U-F1-...
7.6.4

Menu level

A change into the menu level first leads into the main menu. The main menu includes the following 6
menus.
Display Meaning
Menu
MENU
1 sensor
1 SENSOR
Menu
MENU
2 Configura­
2 CONFIG
tion
Menu
MENU
3 Paramet­
3 PARA
erisation
Menu
MENU
4 Characterist­
4 CURVE
ic curve
Menu
MENU
5 Information
5 INFORM
Menu
MENU
6 Initialization
6 INIT
Tab. 12 Main menu
By pressing the Add or Sub key, you can switch forward or backward in the main menu (è Fig. 21).
Pressing the Set button opens the menu. Then the first menu command or parameter is displayed.
Operation
Briefly press Add
Briefly press Sub
Briefly press Set
Press and hold Set
Tab. 13 Operating in the main menu (menu 1 ... 6)
32
Brief description
For testing the sensor sensing range by controlling the
fast-switching valves with the Add and Sub keys
For configuration of the positioner (type of signal setpoint value,
direction of movement, character of the setpoint value
characteristic curve, behaviour of the status outputs, behaviour
upon control signal at the digital input)
For parameterisation of the controller (dead zone, P- and D-part,
limits of the valve operating area and the setpoint value signal
area)
For definition of a user-defined characteristic curve over 21
support points
Shows the smallest and largest sensor position after the last
initialization process, the number of switching cycles of the valves
and the firmware design of the positioner
Makes available functions for initialization and reset of the
positioner
Main menu (menu 1 ... 6)
1 Continue to the next menu (è Fig. 21)
2 Back to the previous menu (è Fig. 21)
3 Open menu (è Fig. 21)
6 Back to the basic menu level (è Fig. 21)
Festo – CMSX-...-C-U-F1-... – 1506a English