Parts List Analyzer Hardware; Speci C Assembly And Cable Locations - Agilent Technologies 8711C Service Manual

Parts List
Analyzer Hardware
he analyzer has been designed to have a minimal number of di erent screw types. Most
applications require one of only two screw types. All are ORX screws requiring a ORX driver
(PN=pan head; FL= at head). Listed below are all the required screws. For clarity, these are
not listed on the following parts lists for each assembly.
Part
Number
0515-0430
0515-0664
0515-1946
0515-0943
0515-0658
0515-0374
Note: ll semi-rigid coax cables should be tightened to 10 in-lbs.
Speci c Assembly and able Locations
he following tables and gures describe the replaceable parts for each of the analyzer's major
assemblies. For information on ordering replacement parts see \How to Order Parts" in the
\Assembly Replacement" chapter.
Analyzer ardware
escription
M3 x 6 PN Most places; all sheet metal
M3 x 12 PN ll casting shields
M3 x 6 FL Handle nut plate screws (4)
M4 x 12 FL Handle screws (8)
M2 x 6 PN Power switch (2)
M3 x 10 PN Connector, Display Ribbon
Cable (2)
Where Used
(Quantity)
Torque river
7 in-lbs T10
7 in-lbs T10
7 in-lbs T10
21 in-lbs T15
3 in-lbs T6
7 in-lbs T10
Parts L st
7
7-1