Specification Operation - Smartgen HGM7100N Series User Manual

3

SPECIFICATION OPERATION

Items
Operating Voltage
Power Consumption
Alternator Volt Input Range
3Phase 4Wire
3Phase 3Wire
Single Phase 2Wire
2Phase 3Wire
Alternator Frequency
Speed sensor voltage
Speed sensor Frequency
Starter Relay Output
Fuel Relay Output
Programmable Relay Output 1
Programmable Relay Output 2
Programmable Relay Output 3
Programmable Relay Output 4
Programmable Relay Output 5
Programmable Relay Output 6
Case Dimension
Panel Cutout
CT Secondary Current
Working Conditions
Storage Condition
Protection Level
Insulating Intensity
Weight
HGM7100N Genset Controller
HGM7100N GENSET CONTROLLER USER MANUAL
Table 2 - Technical Parameters
DC8.0V to DC35.0V, Continuous Power Supply.
<4W (standby ≤2W)
15V AC - 360 V AC (ph-N)
30V AC - 620 V AC (ph-ph)
15V AC - 360 V AC (ph-N)
15V AC - 360 V AC (ph-N)
50 Hz/60Hz
1.0V to 24.0V (RMS)
10,000 Hz (max.)
16 A 28V DC at supply output
16 A 28VDC at supply output
7A 28V DC power supply output
8A 250V AC volt free output
16A 250V AC volt free output
16A 250V AC volt free output
7A 28V DC power supply output
7A 28V DC power supply output
209mm x 166mm x 45mm
186mm x 141mm
5A rated
Temperature: (-25~+70)° C; Humidity: (20~93)%
Temperature: (-25~+70)° C
IP65 Front panel
Apply AC2.2kV voltage between high voltage terminal and low
voltage terminal and the leakage current is not more than 3mA
within 1min.
0.6kg
2020-09-10
Contents
Version1.2 Page 6 of 47