Manufacturer's Laser Information; Status Indicators - Thermo Scientific Antaris II Manual

Manufacturer's
laser information

Status indicators

Thermo Fisher Scientific
In some jurisdictions you may be required to register the instrument;
check with your company's safety officer or your local government
offices. The following is an excerpt from the laser manufacturer's manual
regarding the information that might be needed for registration.
Characteristic
manufacturer
type of laser
wavelength
minimum power
nominal power
maximum power
beam diameter
beam divergence
spacing C/2L
internal operating voltage
CDRH classification
The status indicators show the current status of the instrument.
Power — This indicator lights when the instrument power is on and the
power supply voltage is within specifications.
Scan — This indicator flashes with each scan of the interferometer.
Laser — This indicator lights when power is supplied to the laser and it is
operating within specifications.
Source — This indicator lights when the source is illuminated and it is
operating within specifications.
Regulatory and Safety Information
Specification
Melles Griot
helium/neon (HeNe)
632.8 nm
0.9 mW (TEM00)
1.0 mW
1.6 mW
0.65 cm (1/e2)
1.5 mrad max
1039 MHz
1600 VDC
IIIa
Antaris II and Antaris MX Site and Safety Information 21