3. BASIC DESCRIPTION OF CONTROLS
3.1. GENERAL
THE CONTROL OFFERS :
99 programmable programs (including 20 pre-programmed ones).
Control of signal voltages for external pumps or liquid supply dispensers.
Redistribution of the garments to avoid imbalance.
Automatic temperature balance during the water fill process.
Setting the machine options and configuration.
Multiple languages can be selected (one at a time).
IN OPERATION THE FOLLOWING DATA IS DISPLAYED :
The selected program.
The active wash step.
The remaining program time.
Wash cycle progression bar.
Indication of wait for heat (if selected).
Diagnostic messages.
THE OPERATION MENU :
A program can be manually Shortened, Extended, Stopped.
A pause can be programmed.
A direct operation of selected components (water valves, etc.).
Program overview.
Service information.
THE HARDWARE AND SOFTWARE OF THE WASH COMPUTER
Easy operation by a comprehensive keypad.
The hardware contains 2 electronic board.
The wash computer with graphic LCD display.
The control software of the washing machine is stored in the internal memory of the wash computer
and it can be easily adjusted (USB flash drive).
The Wash Programs are kept in EEPROM memory (non-volatile memory).
8
PROGRAMOVACÍ MANUÁL
540876_A_PUB_DATE_1_FEB_2012.DOC