Step  : Program Step Function - Primus XCONTROL PLUS Original Programming Manual

5.4. STEP  : PROGRAM STEP FUNCTION
Prog. 1: HOT INTENS
Select Step N: 1
Add ...
Edit ...
Insert ...
View ...
Delete ...
Exit
Menu Item
Select Step N°: 1
Add Step
Edit Step
Insert Step
View Step
Delete Step
Exit
540876_A_PUB_DATE_1_FEB_2012.DOC
Edit Step Menu
Info
Insert the desired step number.
Step 1 to 99 can be selected.
Attention!
!
If the number is not accepted, this means that the step is not
available.
No Step number must be selected for „Add Step" function.
To create new programs, a new extra step should be
added at the end of the program.
To change values and list elements from an existing
step.
A new step is inserted in between two existing steps.
If the number is not accepted, this means there is no
step with a step number = inserted number - 1
available. A new step can only be inserted between
two available steps.
Before making changes in a wash program, it's
recommended to have a look at the actual settings by
the view function. No changes can be made at the
View Step function.
An existing Step in the program disappears when it's
deleted. A confirmation is asked first before deleting
the Old Step.
Return to Program Menu
PROGRAMOVACÍ MANUÁL
PROGRAMMING
37