Primus XCONTROL PLUS Original Programming Manual page 40

Menu Item
Off Time
Time
Signal
40
Default Info
3 sec
The wash action, motor Off Time.
Gentle wash action : 12 sec.
(The suggested default values can be adjusted at the Initialization
menu)
4.0 Min
The Prewash Sequence Time.
(for 0 Minutes the Prewash sequence will be skipped)
(programmable in steps of 0,5 Minutes)
No
When a signal is programmed, a pause will be
introduced at the end of the Wash Step. This allows
the operator to add soap for the next step. A buzzer
signal warns the operator that the cycle has been
interrupted.
PROGRAMOVACÍ MANUÁL
Limits
1 - 99 sec
0 - 99.5 Min
No / Yes
540876_A_PUB_DATE_1_FEB_2012.DOC