Operation Menu; Starting Up; Switching On The Power; Load The Washing Machine - Primus XCONTROL PLUS Original Programming Manual

6. OPERATION MENU

6.1. STARTING UP

ATTENTION!
!
BEFORE STARTING UP THE FIRST TIME, BE SURE THAT THE MACHINE IS WELL INSTALLED.
SEE INSTALLATION MANUAL.
MAKE SURE THAT THE CONFIGURATION AND INITIALIZATION MENU HAVE THE RIGHT SETTINGS.
SEE CHAPTER 4.

6.2. SWITCHING ON THE POWER


The display lights up when you switch on the power.
 If the machine is ready to be started, Select CYCLE is displayed.

6.3. LOAD THE WASHING MACHINE


Open the door and load the laundry into the drum. When the drum is loaded, close the door.

6.4. PUT SOAP INTO THE SOAP DISPENSER


Put the correct amount of soap into the soap dispenser.

6.5. STARTING A WASH PROGRAM

 Up to 99 programs can be selected. The first 20 are the standard Wash programs you can
find in this manual at Paragraph 7.2.

Insert the program number.

Press the „START" button.
 If there is no program available for a specific program number, INVALID is displayed.
50
 At the wash sequence, it depends of the pre-programmed water inlets in which
the soap dispenser you have to add soap
 See paragraph 3.4. for more information
PROGRAMOVACÍ MANUÁL 540876_A_PUB_DATE_1_FEB_2012.DOC