Primus XCONTROL PLUS Original Programming Manual page 32

 TRACEABILITY MENU
Traceability is a function to store wash cycle data outside the washing machine, to be able to prove that the
laundering process has been correctly executed.
In case of any failure, the Wash Cycle must be stopped and there must be a warning that the wash cycle
must be repeated correctly.
For more information about traceability see Manual Traceability Management Software.
Menu Item
Enable Traceability No / Yes
Disable Traceability Errors
Exit
 WEIGHING MENU
Menu Item
Weighing System
Automatic Level Adjust.
Automatic Soap Adjust.
Exit
32
Default Info
No
First you have to select Traceability to obtain the other
menu items.
No
Err 81 and Err 82 can be switched off if they disturb to
often the wash process.
Return to Advanced Menu.
Default Info
Manual
No - without weighing system
Manual - manual entering of the linen weight
Yes If the amount of weighed load in the washing machine
is smaller then the capacity of the washing machine,
then the washing machine will run automatically with a
reduced amount of water. This will reduce the water
consumption of the washing machine.
Yes
Similar like Automatic water Level Adjustment, also the
time value of the liquid soap signal is adjusted in
relation with the amount of weighed load, which will
reduce the liquid soap consumption of the washing
machine.
Return to Advanced Menu
PROGRAMOVACÍ MANUÁL
Limits
No / Yes
No / Yes
Limits
No / Manual
No / Yes
No / Yes
540876_A_PUB_DATE_1_FEB_2012.DOC