Primus XCONTROL PLUS Original Programming Manual page 20

Initialization ...
Program ...
Servis ...
Configuration ...
Advanced ...
 Press the ENTER button to make your selection.
 Now you will see the first menu item.
 By pressing the ARROW DOWN or UP button you can select the menu items one by one.
Menu Item
Language
Service Interval
Buzzer Time
Allow Advance
Automatic Cooldown
Wait for Temp
Manual Override
20
Main Menu
Default Info
English
Language selection: English, Spanish, French,...
3000
Number of cycles at which maintenance is required.
9999: the servicing interval is ignored
5 Sec
The time the Buzzer is beeping at end of wash cycle
while „Unload" is displayed.
Yes
The Advance function allows to Skip a Sequence or
to extend & decrease the time of a sequence.
Yes
Automatic Cooldown selection.
(see info (*)).
Yes
Wash Process time is put on Hold as long as the
programmed temperature hasn't been reached. Once
the temperature has been reached, the wash cycle
time will decrease.
Activates special functions in the Servis Info menu.
Yes
The operator can directly operate the water
inlet, drain, heating and spin speed functions.
Attention!
!
The particular functions can only be used if the safety
conditions are fulfilled. For example: if there is no water in
the drum, the heating function cannot be activated.
PROGRAMOVACÍ MANUÁL
Limits
List
1 - 9999
0 - 99
No / Yes
No / Yes
No / Yes
No / Yes
540876_A_PUB_DATE_1_FEB_2012.DOC