Primus XCONTROL PLUS Original Programming Manual page 49

Attention!
!
It's not recommended to program a spin sequence just after a Static Drain Sequence.
At a Static Drain sequence, the garments are not distributed around the drum while the water is drained.
When the spin sequence starts, the garments are a big imbalance and the imbalance (tilt) function will be
activated.
 THE REVERSING DRAIN SEQUENCE
Drain | Extract | No Drain | Static Drain |
The drum is reversing while the water is drained.
Menu Item
Drain Valve
RPM
On Time
Off Time
Time
Exit
540876_A_PUB_DATE_1_FEB_2012.DOC
Reversing Drain
Default Info
1
Only available on washing machines with both : a
normal Open and normal Closed Drain valve.
-
The suggested RPM depends on the machine Type.
12 sec
The mechanical action, motor On Time.
(The suggested default values can be adjusted at the Initialization
menu)
3 sec
The mechanical action, motor Off Time.
(The suggested default values can be adjusted at the Initialization
menu)
0.5 Min
The Static Drain Sequence Time.
(for 0 Minutes the Static Drain sequence will be skipped)
(programmable in steps of 0,5 Minutes)
Return to Edit Program Menu.
PROGRAMOVACÍ MANUÁL
PROGRAMMING
Limits
1 - 2
See table 3.5.B
1 - 99 sec
1 - 99 sec
0 - 15,0 Min
49