Programming; General; Step  : Program Menu - Primus XCONTROL PLUS Original Programming Manual

5. PROGRAMMING

5.1 GENERAL

Specific functions have been implemented in the wash computer to allow a detailed programming.
 Functions for the complete program.
- Program Number :
- Name :
- View :
- Edit :
- New :
- Copy :
- Delete :
- Exit :
 Functions for the program steps.
- Step Number :
- Add :
- Edit :
- Insert :
- View :
- Delete :
- Exit :
Follow the flowchart step by step.
5.2. STEP  : PROGRAM MENU
 HOW TO GET INTO THE PROGRAM MENU
The Program menu can only be accessed when the machine is in standby (the machine is
powered up but no program is started).
SELECT CYCLE is displayed.
Switch the machine to the setup mode (see chapter 3.3).
The Main menu is now available.
Press the ARROW DOWN button to select the Program Menu.
34
Selecting the wash Program.
Insert or Modify the Name for the Program.
Inspecting the Program settings without making changes.
Adjusting a Program.
Creating a New Program.
Making a Copy of an existing Program.
Erase the Program.
Leave the Program Menu.
Selecting the Program Step.
Adding a Program Step at the end of the program.
Adjusting the Program Step.
Adding a Program Step between two other steps.
Inspecting the Step settings without making changes.
Deleting a Step.
Leave the Program Step Menu.
PROGRAMOVACÍ MANUÁL 540876_A_PUB_DATE_1_FEB_2012.DOC