How To Handle Failure Messages - Primus XCONTROL PLUS Original Programming Manual

6.19. HOW TO HANDLE FAILURE MESSAGES

 When a failure has been detected by the Wash Computer, a failure message is generated
to inform the operator about the problem.
XX
YY
Err ZZZ
Fault Message
 At the upper line, the program number and step number of the interrupted program are
displayed.
 The message UNLOAD! will inform you if it's allowed to open the door.
 Safety conditions
 If there is still water in the drum or if the temperature is too high, it's not possible to open
the door.
 The messages „WATER IN CAGE" or „TOO HOT " will be displayed together with the level
and the temperature.
ATTENTION!
!
IT'S UP TO THE OPERATOR TO TAKE THE NECESSARY PRECAUTIONS IF THE DRAIN VALVE IS
NOT FUNCTIONAL AND THERE IS STILL HOT WATER IN THE TUB AT THE END OF THE WASH
CYCLE.
ON THE DISPLAY THE ACTUAL WATER TEMPERATURE AND LEVEL WILL BE DISPLAYED.
WAIT UNTIL THE WATER IS DRAINED AND UNTIL THE WATER HAS COOLED BEFORE ALL
INTERVENTIONS AS HOT WATER CAN CAUSE BURNS.
 If something goes wrong with the door lock, the program will be finished immediately.
 For safety purposes, the door will stay locked.
ATTENTION!
!
GO TO THE CHAPTER 8 TROUBLE SHOOTING TO FIND OUT MORE ABOUT ERROR HANDLING.
540876_A_PUB_DATE_1_FEB_2012.DOC
Out Of Order (Pr: XX St: YY)
Ask For Service
(Err ZZZ : Fault Message)
: The Program number
: The Step number
: The error number
: The name of the error message
PROGRAMOVACÍ MANUÁL
OPERATION
55