Programming A Delay Time; The Active Program - Primus XCONTROL PLUS Original Programming Manual

6.6. PROGRAMMING A DELAY TIME


Enter the selected Program Number.

Press the Dot button.
The Delay time message will be displayed.
 The door must be closed first.

Now you can insert the value for a delay time
DELAYED START _ _ : _ _
 First insert a value for the Hours, then insert a value for the Minutes
 The minimum delay time is 1 minute [ 00:01]
 The maximum delay time is 99 hours and 59 minutes [99:59]

By pressing the START button, the delay time will start to decrease.
 The Door will be locked immediately.
Once the delay time is over, the wash cycle will start automatically.
 The Delay Time Sequence can be interrupted by pressing the Stop button.
The program will return to the Start Up menu: SELECT CYCLE.

6.7. THE ACTIVE PROGRAM

 The cycle time will decrease minute by minute and gives you an indication how long it will
take before the cycle is finished.
 A Progression bar shows the progression of the wash cycle and the active wash step.
540876_A_PUB_DATE_1_FEB_2012.DOC PROGRAMOVACÍ MANUÁL
OPERATION
51