External Liquid Soap Boxes; System With Manual Entering Of The Linen Weight (Smart Load) - Primus XCONTROL PLUS Original Programming Manual

6.21.4. DRAIN

If, during a process in operation, you want to open the draining valve, move in the Service Info
menu to the last page and activate the draining by pressing the button 0.
 Only functional at a running wash sequence.
 The drain valve will be opened for the time you are pressing the button.
6.21.5. HEATING

If, during a process in operation, you want to activate the heating, move in the Service Info
menu to the last page and activate the heating by pressing the button 9.
 Only functional at a running wash sequence.
 The contactor of the heating will remain activated for the time for which you hold the button
pressed.
ATTENTION!
!
ALL THE SAFETY FUNCTIONS WILL STILL BE ACTIVE, SO IT CAN OCCUR THAT YOU CAN'T
ACTIVATE THE HEATING.
6.21.6. SPEED ADJUST

If, during a process in operation, you want to change the rotational speed (revolutions) of the
drum, move in the Service Info menu to the last page and after having pressed the "." (dot) button, enter a
new rotational speed (number of revolutions).
 You can adjust the drum speed by inserting a new value.
 The speed limits will be respected depending on the washing machine type.
ATTENTION!
!
ALL THE SAFETY FUNCTIONS WILL STILL BE ACTIVE , SO IT CAN OCCUR THAT YOU CAN'T
CHANGE THE SPIN SPEED.

6.22. EXTERNAL LIQUID SOAP BOXES

 If the washing machine is connected with external soap pumps, a signal from the soap
supply reservoir can be connected to the washing machine computer.
 If the Soap box is almost empty, then the diagnostic message „Err 39 out of soap" will be
shown on the display of the Wash Computer.
 So the operator does not have to check the soap supply reservoirs continuously to avoid
washing without soap.
6.23. SYSTEM WITH MANUAL ENTERING OF THE LINEN WEIGHT
(SMART LOAD)
 If you now the weight of the linen load (e.g. you weight it before washing), you can activate
the function of manual entering of the linen weight (Advanced menu / Weighing).
 If the door is open there is shown „0kg" as the linen load weight on the display.
Enter the weight value. When you close the door, you will be able to select a wash cycle.
 Depending on the entered weight value of the linen you can enable an automatic setting of
the water consumption and liquid soap supply.
540876_A_PUB_DATE_1_FEB_2012.DOC PROGRAMOVACÍ MANUÁL
OPERATION
57