Troubleshooting; Display Messages; Fault Messages - Primus XCONTROL PLUS Original Programming Manual

8. TROUBLESHOOTING

8.1. DISPLAY MESSAGES

 Various messages may appear on the display at the start, during or at the end of a washing cycle.
 In some specific cases, an acoustic signal will alert the operator.
 When an error occurs the machine will automatically go over to a safe state. With the
diagnostic program you can determine the problem. This program will test the individual functions
of the washing machine one by one.

8.2. FAULT MESSAGES

 If a failure occurs the computer will display a diagnostic error message.
 The program number and step at which the interruption has occurred are displayed.
 The fault message itself contains a number and a corresponding text label by which it's easy to
find the related information in the manual.
 If UNLOAD is displayed, the door can be opened.
XX
YY
Err ZZZ
Fault Message
540876_A_PUB_DATE_1_FEB_2012.DOC
Out Of Order (Pr XX St YY)
Ask For Service
(Err ZZZ : Fault Message)
: the program number
: the program step number
: the number of the occurred error
: the text label of the error message
PROGRAMOVACÍ MANUÁL
TROUBLESHOOTING
69