Configuration Menu - Primus XCONTROL PLUS Original Programming Manual

4.2 CONFIGURATION MENU

This electronic wash computer has been specially constructed for a wide range of washing machines.
For that reason it must be individually set up with important parameters for various machine types.
Basic machine adjusting is made in the factory.
WARNING!
!
ONLY A QUALIFIED TECHNICIAN SHOULD CHANGE THE CONFIGURATION SET UP. AN INCORRECT
CONFIGURATION CAN CAUSE INJURIES AND SERIOUS MACHINE DAMAGE.
 HOW TO GET INTO THE CONFIGURATION MENU
The configuration menu can only be accessed when the machine is in standby (the power is switched on, but
no program is started).
SELECT CYCLE is displayed.
Switch the machine to the setup mode (see chapter 3.3).
The Main menu is now available.
Press the ARROW DOWN button to select the Configuration Menu.
Initialization ...
Program ...
Servis ...
Configuration ...
Advanced ...
Press the ENTER button to make your selection.
For the Configuration Menu a Pass-Word is required.
Configuration Menu
Password
Insert 3 2 1 and Press the ENTER button
Now you will see the first menu item.
By pressing the ARROW DOWN or UP button you can select the menu items one by one.
24
Main menu
_ _ _
PROGRAMOVACÍ MANUÁL 540876_A_PUB_DATE_1_FEB_2012.DOC