Step  : Programming The Drain Step - Primus XCONTROL PLUS Original Programming Manual

5.6. STEP  : PROGRAMMING THE DRAIN STEP
This paragraph gives a detailed explanation about programming the
Drain/Extraction Sequences.
After programming the wash step, the drain/extraction step still has to be programmed.
ATTENTION!
!
YOU DON'T HAVE TO PROGRAM A DRAIN SEQUENCE BEFORE AN EXTRACTION SEQUENCE AS
THE WATER WILL AUTOMATICALLY BE DRAINED AT THE EXTRACTION SEQUENCE
 SELECTING THE DRAIN/EXTRACTION STEP
Depending on the machine type, you have more or less functions.
Wash Drain
Type: Drain
 THE DRAIN SEQUENCE
Drain
| Extract | No Drain | Static Drain | Reversing Drain
Menu Item
Drain Valve
Time
Exit
540876_A_PUB_DATE_1_FEB_2012.DOC
 For a new step, the first sequence that is displayed is
the Drain sequence (default).
z
 Select the desired Drain step sequence from the list by
pressing the ARROW LEFT or RIGHT button.
 Press the ENTER button to confirm your selection.
 You can also use the ARROW DOWN button if you
accept the pre-programmed default value.
Default Info
1
Only available on washing machines with both:
a normal Open and normal Closed Drain valve.
0.5 Min
The Drain Sequence Time.
(for 0 Minutes the Drain sequence will be skipped)
(programmable in steps of 0,5 Minutes)
Return to Edit Program Menu.
PROGRAMOVACÍ MANUÁL
PROGRAMMING
Limits
1 - 2
0 - 15.0 Min
47