5.5. STEP : PROGRAMMING THE WASH PART
Step number
Program 1: HOT INTENS
Step 2
Wash
Time:
Menu
item
This paragraph gives a detailed explanation about programming the Wash Sequences.
Each program step contains a wash part and a drain/spin part.
First the wash part must be selected, item by item can be programmed.
Next the drain/spin part must be selected, item by item can be programmed. See step .
Without making changes you can watch item by item, by pressing the ARROW DOWN or UP
button.
If you want to make changes :
- Insert a new value.
- Enable or disable a Setting by pressing the YES or NO button.
- Select a list element by pressing the ARROW LEFT or RIGHT button.
You always need to confirm by pressing the ENTER button.
Each time you add or insert a new step, default values have been pre-programmed.
So with less effort, complete programs can be programmed.
See also chapter 3 for a general explanation concerning the creation of wash programs.
You can recognize a list element by the LEFT and RIGHT ARROW symbol at the right side
on the display.
The arrow down symbol on the display points to the last Menu Item : EXIT.
38
Program number
+ name
8.0
8.0
Value menu
Original
item
value
PROGRAMOVACÍ MANUÁL
STEP
Wash Spin part
Spin
min
[4.0-20.0]
Limits
menu item
540876_A_PUB_DATE_1_FEB_2012.DOC
5
Position
menu item