Primus XCONTROL PLUS Original Programming Manual page 48

 THE EXTRACT SEQUENCE
Extract
Drain | | No Drain | Static Drain | Reversing Drain
Menu Item
Drain Valve
RPM
Time
Exit
 THE NO DRAIN SEQUENCE
No Drain
Drain | Extract |
 The Drain/Extraction part of the programmed step is skipped.
! Attention!
For some specific functions „No Drain" must be programmed.
Example:
If you want to program a Cool-down Sequence, then „No Drain" must be programmed between the Hot Wash
and the Cool-down Sequence.
Menu Item
Exit
 THE STATIC DRAIN SEQUENCE
Drain | Extract | No Drain |
The drum is at standstill while the water is drained.
Menu Item
Drain Valve
RPM
Time
Exit
48
Default Info
1
Only available on washing machines with both : a
normal Open and normal Closed Drain valve.
-
The suggested RPM depends on the machine Type.
4.5 Min
The Extract Sequence Time.
(for 0 Minutes the Extract sequence will be skipped)
(programmable in steps of 0,5 Minutes)
Return to Edit Program Menu.
| Static Drain | Reversing Drain
Default Info
Return to Edit Program Menu.
Static Drain
| Reversing Drain
Default Info
1
Only available on washing machines with both :
a normal Open and normal Closed Drain valve.
-
The suggested RPM depends on the machine Type.
0.5 Min
The Static Drain Sequence Time.
(for 0 Minutes the Static Drain sequence will be skipped)
(programmable in steps of 0,5 Minutes)
Return to Edit Program Menu.
PROGRAMOVACÍ MANUÁL
Limits
1 - 2
See table 3.5.B
0 - 15,0 Min
Limits
Limits
1 - 2
See table 3.5.B
0 - 15,0 Min
540876_A_PUB_DATE_1_FEB_2012.DOC