Prog 2: WARM WASH
Program
number
6.8. ADVANCING A WASH PROGRAM
Press the ARROW RIGHT button to increase the wash sequence time.
Press the ARROW LEFT button to decrease the wash sequence time.
Press the START button to skip the current step.
6.9. WASH TIME
Once the program has been started, the remaining cycle time is displayed.
The clock symbol indicates whether the time of the running cycle is being counted down or
not. If the clock symbol is not flashing, it means that the cycle time is not being counted down.
The time for which the symbol is not flashing is the extra time.
The total wash time = programmed time (1) + the extra time (2+3+4+5)
1. The programmed time of the processes.
2. The extra time for taking water.
3. The extra time for draining (if the water is not drained in 30 sec and the extended
4. The extra time for heating if „Wait for temperature" is selected.
5. The extra free run time at the end of the spin sequence.
52
Wash program
name
drain time is started)
PROGRAMOVACÍ MANUÁL
Progression
bar
35 Min.
Remaining time
Time unit
wash program
540876_A_PUB_DATE_1_FEB_2012.DOC