Auto-Tuning Operation Example - YASKAWA FSDrive-MV1000 Series Instructions For Use Manual

4.6 Auto-Tuning
u Auto-Tuning Operation Example
The following example demonstrates Rotational Auto-Tuning when using Closed Loop Vector (A1-02 = 3).
Selecting the Type of Auto-Tuning
n
1 The control power supply is powered up. The initial display will appear.
2
Press the or
3
Press to begin setting parameters.
4
Press to select the value for T1-01.
5
Save the setting by pressing
6 The display automatically returns to the display shown in Step 3.
<1> T1-00 will appear on the display when one of the multi-function inputs has been set to switch between motor 1 and motor 2 (H1-
16).
Enter Data from the Motor Nameplate
n
After selecting the type of Auto-Tuning, enter the data required from the motor nameplate.
Note: These instructions continue from Step 6 in "Selecting the Type of Auto-Tuning".
1
Press to access the motor output power parameter T1-02.
Pressing displays the value set in E2-11 (Motor rated capacity) when the
2
control power is energized.
Press ,
3 F1 F2
nameplate data in kW.
4
Press to save the setting.
5 The display automatically returns to the display in Step 1.
126
Operating Procedure
key until the Auto-Tuning display will appear.
<1>
.
Operating Procedure
, , and to enter the motor power
YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions
LCD Display
- MODE - PRG
Auto-Tuning
AUTO
HELP
DATA
FWD
- A.TUNE - PRG
Tuning Mode Sel
T1-01= 0 ∗0∗
Standard Tuning
ESC DATA
FWD
- A.TUNE - PRG
Tuning Mode Sel
∗0∗
T1-01= 0
Standard Tuning
"0"
FWD
Entry Accepted
- A.TUNE - PRG
Tuning Mode Sel
∗0∗
T1-01= 0
Standard Tuning
ESC DATA
FWD
=
LCD Display
- A.TUNE - PRG
Mtr Rated Power
T1-02= 20000kW
(0 ~ 65000)
"20000kW"
ESC DATA
FWD
- A.TUNE - PRG
Mtr Rated Power
T1-02= 20000kW
(0 ~ 65000)
"20000kW"
FWD
- A.TUNE - PRG
Mtr Rated Power
T1-02= 25000kW
(0 ~ 65000)
"20000kW"
FWD
Entry Accepted
- A.TUNE - PRG
Mtr Rated Power
T1-02= 25000kW
(0 ~ 65000)
"20000kW"
ESC DATA
FWD