YASKAWA FSDrive-MV1000 Series Instructions For Use Manual page 72

2.4 Storing Drives
Figure 2.51
Shock-absorbing material
Wooden
beams
Other Precautions
n
Devise measures to prevent the cables being damaged by rats or other possible causes.
Periodic Inspection
n
Inspect the following every month:
• The color of the silica gel. Changing colors indicate that moisture was absorbed. Check absorbency based on the
degree of color change.
• Check the drive for water or condensation from humidity or roof leaks.
• Check the interior and exterior of the drive for rust and corrosion.
NOTICE: Before turning on the power to the drive after a long period in storage, carefully check for moisture and dust.
Failure to comply could result in damage by fire or other damage.
72
Drive side face
50 to 100 mm
Figure 2.51 Preparing a Drive for Storage
Sheet (Use two layers of sheeting at least 0.1 mm thick.)
Shock-absorbing material
Front of drive
Floor
YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions
Asia
Wooden
beams