YASKAWA FSDrive-MV1000 Series Instructions For Use Manual page 180

5.9 Copy Function Related Displays
Digital Operator Display
ndAT
Cause
The drive from which the parameters were
copied and the drive to which the parameters
will be written have different electrical
specifications, capacities, are set to different
control modes, or are different models.
The drive or USB Copy Unit being used to write
the parameters is blank and does not have any
parameters saved on it.
Digital Operator Display
rdEr
Cause
Failed while attempting to read parameter
settings from the drive.
Digital Operator Display
rEAd
Cause
Displayed while the parameter settings are being
read onto the USB Copy Unit.
Digital Operator Display
vAEr
Cause
The drive from which the parameters were
copied and the drive on which the Verify mode is
being performed have different electrical
specifications or are different capacities.
Digital Operator Display
vFyE
Cause
Indicates that parameter settings that have been
Read and loaded onto the Copy Unit or digital
operator are different.
Digital Operator Display
vrFy
Cause
The Verify mode has confirmed that parameter
settings on the drive and parameters read to the
copy device are identical.
180
Model, Voltage Class, Capacity Mismatch
Make sure model numbers and specifications are the same for both drives.
Make sure all connections are correct, and copy the parameter settings onto the USB Copy Unit
or the digital operator.
Error Reading Data
⇒Press and hold the READ key on the USB Copy Unit for at least one second to have the unit
read parameters from the drive.
Reading Parameter Settings (flashing)
This is not an error.
Voltage Class, Capacity Mismatch
Make sure electrical specifications and capacities are the same for both drives.
Parameter settings in the drive and those saved to the copy function are not the same
To synchronize parameters, either copy the parameter settings on the USB Copy Unit or the
digital operator and save them in the drive, or copy the parameter settings on the drive and save
them in the USB Copy Unit or the digital operator.
Comparing Parameter Settings (flashing)
This is not an error.
YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions
Error Name
Possible Solutions
Error Name
Possible Solutions
Error Name
Possible Solutions
Error Name
Possible Solutions
Error Name
Possible Solutions
Error Name
Possible Solutions