2.2 Mechanical Installation
1. Attach the wire ropes for lifting to the support hooks on the top of the panel to lift the drive.
Figure 2.10
2. Ensure that the hanging angle is 45°±15°.
50
Table 2.9 Transportation Procedure 1 (Class: 4 kV)
Transportation Procedure
Wire ropes for lifting
Top view
Drive
Figure 2.10 Inserting Wire Ropes for Lifting
Hanging angle of 45°±15°
Front view
YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions