Iscsi Offload - NEC Express5800 Series Maintenance Manual
Express server
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Useful Features
10.2
iSCSI Offload
This section describes how to enable the iSCSI Offload feature.
Important
1.
Power on the server.
2.
On the POST screen or after NEC logo is displayed, press the <F2> key to launch SETUP.
Select Advanced → PCI Device Controller and Option ROM Settings.
3.
4.
Put the cursor onto LAN1 Option ROM Scan or LAN2 Option ROM Scan and select Enabled.
5.
Save the BIOS setting, and restart the system.
This feature is available only the N8403-083F 10GbE (2ch) riser card is installed.
With N8403-081F or N8403-082F installed, this feature is unavailable.
Tips
If Option ROM Scan of LAN1 and LAN2 is set to Disabled, the screen in step 6 will not
be displayed.
Express5800/B120f Maintenance Guide
10. Advanced LAN Configuration
183
Advertisement
Table of Contents
