NEC Express5800 Series Maintenance Manual page 72

Chapter 2 Useful Features
(5)
Storage Configuration Submenu
On Advanced, choose SATA Configuration and then press <Enter> key to display the menu screen shown
below. For the menu that has
submenus.
Option
SAS Controller
72
on the left, move the cursor to it and then press <Enter> key to show its
Parameter
Disabled
[Enabled]
When configuring SAS boot, internal hard disk drive or solid state drive should not be
Tips
installed, and SAS Controller must be set to Disabled.
Express5800/B120f Maintenance Guide
Description
Enables or disables SAS Controller.
Note: Select Disabled when configuring SAS boot.
1. System BIOS
[ ]: Factory setting