Chapter 2 Useful Features
5.
Select "Yes", and press the <Enter> key.
6.
The following screen is output, and the Consistency Check starts.
(b) Schedule Consistency Check
The scheduled operation of the Consistency Check can be set according to the following procedure.
1.
Select "Controller Management" from the HII main menu, and press the <Enter> key.
2.
Select "Advanced...", and press the <Enter> key.
Important
In the 1st Consistency Check after creating the Virtual Drive, the unused
areas may be inconsistent. Therefore, a lot of inconsistencies may be
detected and a warning log may be registered.
You can check the progress of Consistency Check on Universal RAID
Utility screen, after exiting HII.
Express5800/B120f Maintenance Guide
4. RAID System Configuration
149