NEC Express5800 Series Maintenance Manual page 115

Chapter 2 Useful Features
(5)
Ctrl Mgmt
"Ctrl Mgmt" allows you to check the information on the RAID controller operation settings and to change the
operation settings.
For details about the items, setting values, and description, refer to [Initialization and description on the setting
value].
Initialization and description on the setting value
Item
Coercion Mode
BIOS Mode
Boot Device
Rebuild Rate
BGI Rate
CC Rate
Recon. Rate
Patrol Read Rate
Cache Flush Interval
Spinup Delay
Spinup Drive
Maintain PD Fail
History
Enable Controller BIOS
Enable Stop CC
On Error
Auto Enhance Import
Set Factory Defaults
Default
None
ByPass Error
VD 0 xx.xx
30
30
30
30
30
4
9
2
[X] (Enable)
[X] (Enable)
[ ] (Disable) Specify the operation at error detection in
Check Consistency.
[ ]:Recover and resume.
[X]:Abort
[X] (Enable)
No Do not perform this function.
Important
*1 Do not perform "Set Factory Defaults". If performed, the NEC's factory-set
value will no longer be restored.
Express5800/B120f Maintenance Guide
Description Change
- Prohibited
- Prohibited
- Prohibited
- Permitted
- Permitted
- Permitted
- Permitted
- Permitted
- Prohibited
- Prohibited
- Prohibited
- Prohibited
- Prohibited
Permitted
- Prohibited
Prohibited *
4. RAID System Configuration
Remarks
1
115